
Remo · Pinstripe
Remo Pinstripe Ebony
The Remo Pinstripe Ebony is two plies — 10-mil Ebony over 5-mil clear — bonded at the edges and free-floating in the middle. That construction damps the perimeter hard while leaving the centre open, giving focused low-end tones with controlled sustain, on Remo's opaque black film.
A heavier Pinstripe than the usual one
The standard Pinstripe is two plies of 7-mil film. This one is 10-mil Ebony over 5-mil clear — 15 mil total rather than 14, but distributed very differently: a thick outer ply where the sticks land and a thin inner ply doing the damping work.
That is a meaningful change. A 10-mil outer ply is Ambassador gauge in its own right, so the surface under the stick feels firmer and takes more abuse than a 7-mil ply does, while the 5-mil under-ply keeps the head from becoming as heavy as two 10s would make it.
What makes a Pinstripe a Pinstripe
Not simply the two plies. It is where they are joined.
The plies are bonded around the perimeter and left free across the centre. So at the edge of the head the two layers behave as one stiff laminate and damp each other heavily; across the middle they are two independent membranes with air between them.
The result is a head that is dead at the rim and alive in the middle — and since high, tight overtones live at the perimeter and the fundamental lives at the centre, that is exactly the right way round. Remo’s description, focused low-end tones with controlled sustain, follows directly.
Ebony rather than coated black
Worth distinguishing, because it changes the weight. Remo’s Ebony film is opaque black stock: the colour is in the material. A coated black head would be clear film with black sprayed onto it, and that coating is added mass that damps.
So this head’s behaviour comes from its plies and its bonding pattern alone, which makes it slightly more open than a coated Pinstripe of similar weight — and it means there is no coating to abrade off where sticks land.
The trade
Sensitivity. A Pinstripe is among the drier heads in the range and it is not subtle about it: ghost notes are quiet, low-volume playing takes work, and brushes have a smooth surface with little to grip. That is the direct consequence of the perimeter bonding that makes the head so controlled.
Where it fits
Tom batters where the drums must not ring and must sound big, on kits that need to read black. The coated and clear Pinstripes are the lighter standard versions at two plies of 7 mil.
Specifications
Where to find it
Some links below are affiliate links — if you buy through one, Drum Atlas may earn a commission at no extra cost to you. Commission never affects what we list or how we describe it. Full disclosure.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec