
Remo · Pinstripe
Remo Pinstripe
The Remo Pinstripe is two plies of 7-mil film with an overtone-reducing agent applied between them around the outer edge. It produces a short, fat, controlled note with strong attack and very little ring, and is the standard fitted-and-forgotten tom head on countless kits.
The head that tunes itself
The Pinstripe’s reputation is that it sounds good without effort, and that is roughly true. The two plies are bonded only around the outer edge, which lets them move slightly independently in the middle and cancel each other’s high overtones. The result is a fat, short note at almost any tension.
That makes it the obvious choice if you do not enjoy tuning, and the obvious thing to avoid if you do. What you gain in convenience you lose in range: a Pinstripe tuned high does not get bright and open the way a single ply does, it just gets tighter.
What it sounds like
Punchy attack, immediate decay, a pronounced low-mid thump. It is a very 1980s sound and it has never really gone away, because it records easily and needs almost no gating.
On a snare it is heavy and dry — usable, but most players prefer a two-ply with less built-in damping. On toms it is exactly the point.
Against the alternatives
| Pinstripe | Emperor | Evans G2 | |
|---|---|---|---|
| Plies | 2 × 7 mil | 2 × 7 mil | 2 × 7 mil |
| Extra damping | Yes, between plies | No | No |
| Note length | Shortest | Medium | Medium |
| Tuning range | Narrow | Wider | Wider |
All three are nominally the same construction. The damping agent is the entire difference, and it is a bigger difference than the spec sheet suggests.
Specifications
Where to find it
Some links below are affiliate links — if you buy through one, Drum Atlas may earn a commission at no extra cost to you. Commission never affects what we list or how we describe it. Full disclosure.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 1 · Primarymanufacturer spec
- 3Tier 1 · Primarymanufacturer spec