Drum Atlas
Menu

Remo · Pinstripe

Remo Pinstripe Ebony Crimplock

  • Drumhead
  • pro
  • current

The Remo Pinstripe Ebony Crimplock is a marching batter of 7-mil ebony film over 7-mil clear, carrying Pinstripe's bonded-edge dampening and mounted on a high-tension Crimplock hoop. The two plies are free to move except at the perimeter, which is where Pinstripe's tone control comes from, and the ebony film gives it a reflective black face.

Updated 2026-10-14Sources

Catalogue record. This entry carries specifications and their sources, and no written assessment — nobody has written one yet. Everything in the table below is sourced and marked the same way as anywhere else on the site. For entries that explain the design rather than only record it, see the anatomy pages or any model marked as a full entry.

Specifications

Specifications
AttributeValue
Heads
Plies21
Film thickness7 + 7 mil1
CoatingEbony1
PositionBatter1
DampeningPinstripe process — the two plies bonded at the perimeter only1
HoopHigh-tension Crimplock1
Intended useMarching tenor drums1†Also reported as Marching bass drumsRemo's feature list on this page says marching bass drum applications; the longer description on the same page says marching tenor throughout, and the part numbers are 6 to 14 inch, which is tenor sizing.
CharacterOptimum tone control, projection and durability with outstanding attack1
  • *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.
  • †Sources disagree on this value; both readings are given.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Pinstripe Ebony Crimplock

    Remo · accessed 2026-10-14