
Remo · Falams XT
Remo Falams XT Smooth White Snare Side
The Remo Falams XT Smooth White Snare Side is a 5-mil Kevlar weave laminated to Smooth White film with a Mylar inlay ring for overtone control, in a high-tension Duralock Crimplock hoop. The ring is what the XT adds: a crisp, articulate snare response with extreme durability.
What the XT adds
Set this next to the standard Falams snare side and almost everything is the same: a 5-mil Kevlar weave laminated to Smooth White film, in a high-tension Duralock Crimplock hoop.
The addition is a Mylar inlay ring for overtone control — and Remo’s description moves from high durability to extreme durability alongside it.
Both of those come from the same part. A band of film bonded around the perimeter damps the edge of the head, where the high, tight overtones live, and it reinforces the perimeter at the same time, which is where a high-tension head is under most stress.
Why a marching snare side needs overtones taken out
A marching snare is a very loud drum in a section of very loud drums, played outdoors next to a hornline. The thing that ruins clarity in that environment is not volume, it is anything that rings on after a stroke — and a resonant head under high tension has a lively, high-pitched voice of its own.
Damping the perimeter removes that without removing the wire response, because the wires are being driven by the centre of the head rather than its edge. Remo’s phrase is a crisp, articulate snare response, and the ring is protecting the articulate half.
Indoors, where the room adds its own reverberation to everything, the case for it is stronger again.
The durability half
A snare side is the shortest-lived head on any drum, and on a marching drum tuned to aramid tension for a whole season it is under constant strain — most often failing at or near a lug.
Extra film around the perimeter is material in exactly the place that fails. For a programme that budgets for mid-season head replacement, that can be the difference that pays for the upgrade.
Where it fits
Marching snare drums in Crimplock hoops, in loud sections and indoor ensembles, under an aramid batter. The standard Falams snare side is the plainer, lower-cost version without the ring.
Specifications
| Attribute | Value |
|---|---|
| Heads | |
| Film thickness | 5 mil1 |
| Coating | Smooth white1 |
| Position | Snare side1 |
| Construction | 5-mil Kevlar aramid weave laminated to Smooth White film1 |
| Dampening | Mylar inlay ring for overtone control1 |
| Hoop | High-tension Duralock Crimplock hoop1 |
| Intended use | Marching snare side1 |
| Character | Crisp, articulate snare response with extreme durability1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec