Drum Atlas
Menu

Remo · Falams

Remo Falams Smooth White Snare Side

  • Drumhead
  • pro
  • current

The Remo Falams Smooth White Snare Side is a marching snare resonant head: a 5-mil Kevlar weave laminated with Smooth White film, in a high-tension Duralock Crimplock hoop. Aramid on the bottom of a marching snare is what lets the resonant head take the same tension as the batter and stay crisp.

Updated 2026-09-24Sources

Five mil, and aramid, on the bottom of the drum

A kit snare side head is 2 or 3 mil of film and chosen for sensitivity. A marching snare side is a different object entirely, and this one shows why: 5 mil, laminated onto a Kevlar weave, in a high-tension hoop.

The reason is tension. A marching snare’s batter is tuned as tight as an aramid head will go, and the resonant head has to be tuned to match — a slack bottom head under a board-tight batter gives a dull, choked drum no amount of wire adjustment will rescue. Film at 3 mil will not survive that tension for a season.

So the bottom head gets aramid too, and the laminated film closes the weave so the head is airtight enough to drive the wires.

What it does to the snare response

Remo’s phrase is a crisp, articulate snare response with high durability, and crisp is doing the work there.

A heavy, high-tension resonant head moves less per stroke than a thin one, so the wires answer only to real strokes and the response stops the instant the stroke does. On a kit that would cost you ghost notes and be a bad trade; on a marching snare it is precisely the point — the idiom is built on a dry, immediate, fast-stopping sound with nothing ringing between the notes.

The hoop

A Duralock Crimplock hoop: Remo’s marching hoop system with reinforcement, because a hoop built for film tension will pull apart under aramid tension. It fits Crimplock drums only.

Why the bottom head is the one to check

Snare sides are the shortest-lived heads on any drum and the ones players think about least. On a marching drum, tuned high and carried through a season, that is even truer — and a drum that has gone dull and lost its crispness has very often just stretched its resonant head, not its batter.

Changing the bottom head first is the cheaper diagnosis and the more likely fix.

Where it fits

Marching snare drums in Crimplock hoops, under an aramid batter. The Falams XT snare side adds a Mylar inlay ring for overtone control and greater durability again.

Specifications

Specifications
AttributeValue
Heads
Film thickness5 mil1
CoatingSmooth white1
PositionSnare side1
Construction5-mil Kevlar aramid weave laminated with Smooth White film1
HoopHigh-tension Duralock Crimplock hoop1
Intended useMarching snare side1
CharacterCrisp, articulate snare response with high durability1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Falams Smooth White Snare Side

    Remo · accessed 2026-09-24