
Remo · Controlled Sound X
Remo Controlled Sound X Coated Black Dot
The Remo Controlled Sound X Coated Black Dot is one ply of 12-mil coated film — 20 per cent thicker than a standard Controlled Sound — with a 5-mil black dot underneath the centre. Heavier film plus a reinforced impact area give focused midrange tones with added durability, in 13 and 14 inch.
The X is the film, not the dot
Controlled Sound describes a dot. The X describes the head underneath it.
A standard Controlled Sound is Ambassador weight — one ply of 10 mil. Controlled Sound X is the same construction on 12-mil film, which Remo puts as 20 per cent thicker than the standard coated version.
So this head reinforces twice. The gauge takes more punishment across the whole surface, and the dot takes more again at the centre. It is a single ply throughout, which matters: two plies would change how the head responds, not just how long it lasts.
Two mechanisms, two effects
Gauge damps evenly. A thicker film flexes less and loses more energy internally, so the note is shorter and the fundamental stronger everywhere on the head. It also widens the midrange, which is what Remo means by focused midrange tones.
The dot damps and stiffens locally, over the small area sticks actually land on. That hardens the attack and roughly doubles the material where heads fail.
Neither touches the perimeter, so the drum keeps more of its own ring than a Powerstroke or Pinstripe would allow.
The dot underneath
Remo puts it on the bottom here, and that is the decision that keeps the head playable.
A top dot lasts longest, because the stick never reaches the base film — but it replaces the playing surface, and on a coated head the coated surface is the reason you chose it. Brushes cannot cross a raised disc either.
Underneath, the stick meets coating as normal, the feel and brush response survive, and the dot stiffens from below. Slightly less durable; considerably more natural.
Who it is for
Snare players who have gone through coated Controlled Sound heads and want the same character to last longer, without accepting the loss of sensitivity that a two-ply Emperor X brings.
The trade against a 10-mil head is real but modest: a little less response at low volume, a slightly firmer feel, and a marginally shorter note.
Where it fits
Snare drums, 13 and 14 inch, in loud playing. The plain Controlled Sound Coated is the lighter original; Emperor X is the two-ply escalation for players destroying even this.
Specifications
| Attribute | Value |
|---|---|
| Heads | |
| Plies | 11 |
| Film thickness | 12 mil1 |
| Coating | Coated1 |
| Position | Snare batter1 |
| Dampening | 5-mil centre dot1 |
| Dot thickness | 5 mil1 |
| Dot position | Bottom1 |
| Relation to Controlled Sound | 20 per cent thicker than the standard Controlled Sound Coated1 |
| Character | Focused midrange tones with added durability1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec