
Remo · Banjo Heads
Remo Banjo Head Ebony
The Remo Ebony Banjo Head is an opaque black film with a shiny, reflective face. It brings out the lower frequency response of a banjo, giving a very mellow tone with long sustain, and it is the one head in the range chosen as much for how it looks as for what it does.
Catalogue record. This entry carries specifications and their sources, and no written assessment — nobody has written one yet. Everything in the table below is sourced and marked the same way as anywhere else on the site. For entries that explain the design rather than only record it, see the anatomy pages or any model marked as a full entry.
Specifications
| Attribute | Value |
|---|---|
| Heads | |
| Plies | 11 |
| Film thickness | Not published1*Remo publishes no film gauge for the banjo head range. |
| Coating | Ebony — opaque black reflective film1 |
| Collar | Three heights: low 3/8 in, medium 7/16 in, high 1/2 in1 |
| Intended use | Banjo1A banjo head is the instrument's only head, so Remo publishes no batter or resonant position for this range. |
| Character | Mellow tone with long sustain and enhanced low frequencies1 |
| Size range | 10 to 12 1/8 in in 1/16-inch increments1Remo states the line runs in 1/16-inch increments from 10 to 12 1/8 inch. The sizes listed here are the ones the product page's own part-number table showed. |
- *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec