Drum Atlas
Menu

Remo · Banjo Heads

Remo Banjo Head Fiberskyn

  • Drumhead
  • pro
  • current

The Remo Fiberskyn Banjo Head carries the look and sound of an old calfskin head with modern synthetic conveniences. The tone is warm and round — players describe it as plunky, or as an Appalachian mountain sound — with a short sustain like the coated heads but more low end underneath it.

Updated 2026-10-14Sources

Catalogue record. This entry carries specifications and their sources, and no written assessment — nobody has written one yet. Everything in the table below is sourced and marked the same way as anywhere else on the site. For entries that explain the design rather than only record it, see the anatomy pages or any model marked as a full entry.

Specifications

Specifications
AttributeValue
Heads
Plies11
Film thicknessNot published1*Remo publishes no film gauge for the banjo head range.
CoatingFiberskyn — textured synthetic calfskin1
CollarThree heights: low 3/8 in, medium 7/16 in, high 1/2 in1
Intended useBanjo1A banjo head is the instrument's only head, so Remo publishes no batter or resonant position for this range.
CharacterWarm, round tone with short sustain and more low-end frequency than a coated head1
Size range10 to 12 1/8 in in 1/16-inch increments1Remo states the line runs in 1/16-inch increments from 10 to 12 1/8 inch. The sizes listed here are the ones the product page's own part-number table showed.
TechnologyFiberskyn1
  • *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Banjo Head Fiberskyn

    Remo · accessed 2026-10-14