
Remo · Banjo Heads
Remo Banjo Head Coated Bottom
The Remo Coated Bottom Banjo Head puts the frosted coating on the underside of the film, so the sound is close to a coated top while the top surface stays smooth. That smooth face is what tenor and plectrum players want: it is quieter under a strumming hand.
Catalogue record. This entry carries specifications and their sources, and no written assessment — nobody has written one yet. Everything in the table below is sourced and marked the same way as anywhere else on the site. For entries that explain the design rather than only record it, see the anatomy pages or any model marked as a full entry.
Specifications
| Attribute | Value |
|---|---|
| Heads | |
| Plies | 11 |
| Film thickness | Not published1*Remo publishes no film gauge for the banjo head range. |
| Coating | Coated on the underside — smooth white top surface1 |
| Collar | Three heights: low 3/8 in, medium 7/16 in, high 1/2 in1 |
| Intended use | Banjo1A banjo head is the instrument's only head, so Remo publishes no batter or resonant position for this range. |
| Character | Close to a coated top head, with a smooth top surface that is quieter when strumming1 |
| Size range | 10 to 12 1/8 in in 1/16-inch increments1Remo states the line runs in 1/16-inch increments from 10 to 12 1/8 inch. The sizes listed here are the ones the product page's own part-number table showed. |
- *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec