Drum Atlas
Menu

Remo · Banjo Heads

Remo Banjo Head Cloudy

  • Drumhead
  • pro
  • current

The Remo Cloudy Banjo Head is a translucent film sitting between clear and coated: the same long sustain as the clear head with a slightly hazy look and a slightly warmer sound. It is the choice for a player who wants the clear head's openness with some of the frosted head's warmth.

Updated 2026-10-14Sources

Catalogue record. This entry carries specifications and their sources, and no written assessment — nobody has written one yet. Everything in the table below is sourced and marked the same way as anywhere else on the site. For entries that explain the design rather than only record it, see the anatomy pages or any model marked as a full entry.

Specifications

Specifications
AttributeValue
Heads
Plies11
Film thicknessNot published1*Remo publishes no film gauge for the banjo head range.
CoatingCloudy — hazy translucent film1
CollarThree heights: low 3/8 in, medium 7/16 in, high 1/2 in1
Intended useBanjo1A banjo head is the instrument's only head, so Remo publishes no batter or resonant position for this range.
CharacterSlightly warmer than the clear head with the same long sustain1
Size range10 to 12 1/8 in in 1/16-inch increments1Remo states the line runs in 1/16-inch increments from 10 to 12 1/8 inch. The sizes listed here are the ones the product page's own part-number table showed.
  • *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Banjo Head Cloudy

    Remo · accessed 2026-10-14