Hanuš & Heřt Jazz Kit
Hanuš & Heřt build complete kits alongside the snare drums the workshop is known for, using the same stave construction: vertical blocks of solid maple, oak or an exotic species, with the shop's laminated wooden hoops. A jazz configuration of 18-inch bass drum, 10-inch tom and 13-inch floor tom was documented in the workshop in 2006.
A snare workshop that also builds kits
Hanuš & Heřt describe themselves as makers of small drums, and the snare is where the shop’s reputation sits. Kits are the other half of the bench, built to order in small numbers by the same method.
The one documented in the workshop is a jazz configuration: 18-inch bass drum, 10-inch tom, 13-inch floor tom. Small sizes even by jazz standards, and the visiting writer’s reaction to the bass drum is the useful part of the account — that for its diameter it was surprisingly and genuinely bassy.
That is what a stave shell is supposed to do. Solid vertical wood with no cross-laminations gives a lower fundamental for a given diameter than a ply shell of the same size, which is exactly the trade a small bass drum needs.
The same shells, scaled up
Every drum in the kit is built the way the snares are: solid blocks cut to an angle that changes with the diameter, glued edge to edge, dried and stabilised, turned true inside and out, then cut to a very thin bearing edge.
A larger diameter means a blunter angle between blocks, and the workshop varies it rather than holding it at a constant 45 degrees — a choice made on how a kit of different sizes looks together as much as on how it is cut.
Maple and oak are kept in stock. The exotics — jarrah, rosewood, American cherry — come in from Sweden, which is a long way round for timber and says something about how few suppliers there are for this kind of stock.
Hardware made elsewhere on purpose
The first drum the pair made used hardware off an old Amati, the Czech state-era instrument maker. Before long they were making their own.
Then they stopped making it in the same room, and the reason is a good one: metalworking is dirty, and shells being French-polished cannot share air with it. The hardware is now made to their design by colleagues in another shop.
It is a small decision that tells you what the priority is. Everything about this workshop is organised around a finish that takes days and shows every speck.
Where it fits
Jazz playing, and players who want a kit that matches a Hanuš & Heřt snare. It is an expensive instrument and the shop has never pretended otherwise — the 2006 feature put a jazz kit at around ninety thousand crowns and a snare at about eight hundred euros.
Hanuš and Heřt were the first custom snare builders in the Czech Republic, which makes their kits the older half of a trade that now includes Hallvad and others working the same way a few hours down the road.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell construction | Stave — vertical blocks of solid wood1*From a 2006 workshop feature in Muzikus in which Erik Hanuš describes the method; not a published spec sheet. |
| Shell materials offered | Maple, oak, and exotics including jarrah, rosewood and American cherry1*Species named by Erik Hanuš in the Muzikus feature; maple and oak held in stock, exotics imported from Sweden. |
| Finish | French polish — shellac and ground pumice over hundreds of layers1*Described at length in the Muzikus feature. |
| Hardware | |
| Hoops | The workshop's own laminated wooden hoops1*Described in the Muzikus feature as the workshop's characteristic fitting, fitted across its instruments. |
| Hardware | Made to the workshop's design by an outside shop, to keep metalworking out of the room where shells are finished1*Erik Hanuš explains the arrangement in the Muzikus feature; earlier drums used Amati hardware. |
| Build | |
| Documented configuration | 18 in bass drum, 10 in tom, 13 in floor tom1*The kit the Muzikus writer played in the workshop in 2006; kits are built to order rather than to a size list. |
| Origin | |
| Made in | Czech Republic1*The workshop is in Prague. |
- *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 3 · Secondaryinterview