Drum Atlas
Menu

DW · Performance Series

DW Performance Low Pro

  • Drum kit
  • pro
  • current

The Performance Low Pro is a three-piece of extremely shallow North American maple drums: a 3 x 20 in bass drum, a 3 x 10 in tom and a 3 x 13 in floor tom, handcrafted in DW's California shop with all tom mounting hardware included. Three inches of depth makes the kit fit where a conventional one cannot.

Updated 2026-09-24Sources

Three inches, on every drum

A 20 in bass drum is normally 14 to 18 in deep. This one is three. So is the 10 in tom, and so is the 13 in floor tom.

At that depth the air column inside the shell is too short to resonate in any meaningful way, so the drums behave almost entirely as heads under tension. What comes out is a short, dry, immediate note with very little sustain and a pitch set almost purely by the head.

That is a specific sound rather than a compromise. It is close to what a heavily damped conventional kit produces in a studio, arrived at by shell geometry instead of by tape and pillows.

Why a kit this shape exists

DW developed the Low Pro with Gil Sharone, and the practical brief is space. A three-inch-deep kit occupies a fraction of the floor and the stage height of a conventional one, which matters on tight stages, in orchestra pits, on television sets and in rooms where a full kit will not fit behind other players.

The volume follows from the shape. Small air volumes move less air, so the kit is quieter than its diameters suggest.

Still Performance Series

The shells are 100 per cent North American maple, handcrafted in DW’s California custom shop like the rest of the Performance Series, and the kit ships with all its tom mounting hardware.

DW does not publish a ply count for this pack, so none appears above.

Where it fits

The most specialised kit in the Performance Series and the one with the narrowest brief. Anyone wanting a compact kit that still sounds like a normal kit should look at the Design Frequent Flyer instead; this is for when the space itself is the constraint.

Specifications

Specifications
AttributeValue
Shell
Shell materialNorth American maple1
Shell depthLow profile — 3 in on every drum1
Build
Built inDW's California custom shop1
kit
IncludedAll tom mounting hardware1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Performance 3-Piece Low Pro Kit

    Drum Workshop · accessed 2026-09-24