
DW · Design Series
DW Design Frequent Flyer
The Frequent Flyer is DW's tour-sized Design Series four-piece: 100 per cent North American maple in 8-ply shells built with HVLT grain orientation, sized 12 x 20 in bass drum, 8 x 12 in tom, 11 x 14 in floor tom and 5 x 14 in snare, with mini-turret lugs, STM tom mounts and a MAG throw-off.
Shallow everywhere, on purpose
Twelve inches of depth on a 20 in bass drum, eight on a 12 in tom, eleven on a 14 in floor tom. Every drum in the Frequent Flyer is shallower than the same diameter would normally be.
The effect is consistent across the kit. Less air behind each head means each drum speaks faster and decays sooner, which is exactly what a jazz or funk player wants and exactly what makes a kit light enough to carry. DW’s stated brief — lightweight, tour-sized, professional quality — is served by the same decision three times over.
HVLT
HVLT is DW’s grain orientation scheme: the shell’s plies are laid with their grain running in alternating directions, horizontal and vertical, rather than all one way.
Cross-orienting plies is standard plywood practice for dimensional stability. DW’s claim goes further — that the arrangement lowers the shell’s timbre, giving warm punch rather than the brighter tone an all-vertical maple shell would produce. The physics is plausible: grain direction changes stiffness, and stiffness changes where a cylinder’s resonances sit.
Eight plies is not thin
Design Series shells are 8-ply, which is thicker than the 6 or 7 plies DW uses on Collector’s Series toms. A thicker shell gives more projection and a stronger fundamental with less shell colour, and it is part of what separates Design from the custom shop lines above it.
On drums this shallow the thickness is welcome. Shallow shells give away low end, and a stiff cylinder puts some of it back as projection.
Where it fits
The compact end of the Design Series, beside the Mini Pro. The Frequent Flyer keeps conventional proportions on a 20 in kick; the Mini Pro takes the bass drum down to 16 in. Both use the same shell and hardware.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec