
ddrum · SE Flyer
ddrum SE Flyer
The SE Flyer is ddrum's bop-sized four-piece in poplar — 6-ply toms and an 8-ply bass drum with 45-degree edges, a 14 x 18 in kick with natural lacquer wood hoops, and a bass drum lift included so a standard pedal strikes the small head in the right place.
Bop sizes, not travel sizes
An 18 in bass drum, a 12 in tom and a 14 in floor tom is the configuration jazz players settled on decades ago, and it has since become the default for anyone who wants a small kit that still plays like a kit. ddrum’s own framing is that drummers across styles now use these sizes because they transport and set up easily without giving up sound.1
The distinction against a travel kit is depth. Every drum here is conventionally proportioned — 14 in deep on the kick, 14 in on the floor tom — so the drums have air behind their heads and behave normally under tuning.
Poplar, thicker at the bottom
Six plies for the toms and eight for the bass drum is a sensible graduation: the bass drum carries far more head tension over a longer span, so it gets the stiffer cylinder.
Poplar is the warm, soft, fast-decaying end of the shell spectrum. On drums this size that is a reasonable match — small drums are naturally bright, and a wood that takes the top off keeps them from sounding thin.
The lift is in the box
An 18 in bass drum sits low enough that a standard pedal beater lands below the centre of the head. ddrum includes a lift, which puts the beater back where it belongs.
The wood bass drum hoops in natural lacquer are the other notable inclusion: heavier and stiffer than steel, and part of why the kit reads as a vintage-leaning instrument rather than a compact modern one.
Adding to it
ddrum lists add-on drums in 5 x 14 and 6 x 13 in snares, 7 x 10 and 8 x 12 in rack toms, 12 x 13, 14 x 14 and 14 x 16 in floor toms, and 15 x 16 and 14 x 18 in bass drums — which is also the parts list the Pitstop configuration is drawn from.
Footnotes
-
ddrum’s SE Flyer series page sets out the reasoning behind the two configurations. ↩
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Poplar1 |
| Plies | 6-ply toms; 8-ply bass drum1 |
| Bearing edge | |
| Bearing edge | 45 degrees1 |
| Hardware | |
| Hoops | 1.6 mm triple flanged; natural lacquer wood on the bass drum1 |
| Lugs | Single point round, low mass1 |
| Tom mount | Direct to shell1 |
| Heads | |
| Stock heads | Coated Remo UT1 |
| kit | |
| Included | Bass drum lift, tom mount with tom arm and boom arm1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 1 · Primarymanufacturer spec