Drum Atlas
Menu

Zildjian · A Zildjian

Zildjian A 14" Quick Beat Hi-Hats

  • Cymbal
  • pro
  • current

The Zildjian A 14" Quick Beat Hi-Hats are a B20 cast bronze pair with a medium-heavy top over a heavy bottom, the bottom cymbal carrying four laser-cut holes and a flat profile. The vents release trapped air fast, which is where the short, pronounced chick the model is named for comes from.

Updated 2026-09-24Sources

Four holes and a flat profile

The engineering here is in the bottom cymbal. Two cymbals closing on each other trap air between them, and trapped air is what makes a heavy pair sound sluggish and airy. Zildjian laser-cuts four holes through the bottom and flattens its profile so the air has somewhere to go, and the pair snaps shut.

The audible result is a chick with a hard front edge and almost no tail. At 14 inches with a medium-heavy top on a heavy bottom, this is among the most definite hi-hat sounds Zildjian makes.

Against the New Beat

Same family, same diameter, different job. The New Beat is a medium top on a heavy bottom and gives an all-purpose blend of stick and chick. The Quick Beat is heavier on top and vented underneath, so it trades some of that blend for cut and speed.

If the hi-hat has to be heard over loud guitars, the Quick Beat is the more reliable answer. If it has to sit inside an arrangement, the New Beat is.

Where a lighter pair serves better

A heavy pair at 14 inches gives up half-open wash and fine dynamic shading — there is less to draw out at low volume, and brushes get very little from it. That is the trade for the projection, and it is why many players keep a lighter pair as well.

Specifications

Specifications
AttributeValue
Cymbal
TypeHi-hats1
AlloyB20 bronze — 80% copper, 20% tin, traces of silver2*Zildjian publishes no alloy on its own site and calls the recipe its Secret Alloy; Modern Drummer gives the composition of the B20 bell bronze the cast lines are poured from.
WeightMedium-heavy top, heavy bottom1
CharacterLightning-quick chick, short and pronounced, heavy enough to cut through anything1
Catalogue numberA01501
Origin
Made inUnited States3Zildjian: all instruments made in the USA, cymbals at the Norwell, MA factory.
  • *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    14" A Zildjian Quick Beat HiHats

    Zildjian · accessed 2026-09-24

  2. 2Tier 2 · Higheditorial

    What You Need to Know About… Cymbal Alloys

    Modern Drummer · accessed 2026-09-24

  3. 3Tier 1 · Primarymanufacturer spec

    About Us

    Zildjian · accessed 2026-09-24