Drum Atlas
Menu

Zildjian · A Zildjian

Zildjian A 14" New Beat Hi-Hats

  • Cymbal
  • pro
  • current

The Zildjian A 14" New Beat Hi-Hats are a B20 cast bronze pair with a medium top over a heavy bottom, symmetrically machine hammered and lathed with a traditional wide groove. Designed with Louie Bellson, the 14-inch pair is the size the model is built around and one of the most widely used hi-hats made.

Updated 2026-09-24Sources

Why the heavy bottom matters

The New Beat is a medium top on a heavy bottom, and that asymmetry is the whole design. Louie Bellson asked for a pair with a solid beat and a definite chick, and a heavy bottom cymbal gives both: it does not flex away under the stick, and when the foot closes the pair the air is forced out cleanly instead of sighing.

A matched pair of two medium cymbals sounds looser and washier. That is a legitimate sound — several K pairs are built that way — but it is not this one.

14 inches, and what the other sizes do

New Beats are made from 12 to 15 inches. The 14 is the standard and the one almost everyone means: small enough to close quickly and articulate a fast pattern, big enough that the backbeat has weight.

The 13 is tighter and higher and sits further back in a mix. The 15 is slower to close, with more wash half-open and a lower chick. Neither is a substitute for the 14, which is why the 14 is what ships in nearly every pack.

Wide-groove lathing

Traditional wide grooves and symmetrical machine hammering are what give this pair its even, predictable voice — the overtones are regular rather than scattered. Hand hammering produces more complexity; uniform machine hammering produces more consistency, and for a hi-hat that has to do the same thing eight times a bar, consistency is the point.

Specifications

Specifications
AttributeValue
Cymbal
TypeHi-hats1
AlloyB20 bronze — 80% copper, 20% tin, traces of silver2*Zildjian publishes no alloy on its own site and calls the recipe its Secret Alloy; Modern Drummer gives the composition of the B20 bell bronze the cast lines are poured from.
WeightMedium top, heavy bottom1
HammeringSymmetrically machine hammered1
LathingTraditional wide groove1
CharacterAll-purpose combination of stick and chick, pure, bright and expressive1
Catalogue numberA01331
Origin
Made inUnited States3Zildjian: all instruments made in the USA, cymbals at the Norwell, MA factory.
  • *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    A Zildjian New Beat HiHats

    Zildjian · accessed 2026-09-24

  2. 2Tier 2 · Higheditorial

    What You Need to Know About… Cymbal Alloys

    Modern Drummer · accessed 2026-09-24

  3. 3Tier 1 · Primarymanufacturer spec

    About Us

    Zildjian · accessed 2026-09-24