Drum Atlas
Menu

Masterwork · Sehhar

Masterwork Sehhar 20" Ride

  • Cymbal
  • pro
  • current

The Masterwork Sehhar 20" Ride is lathed across the middle and underside in the traditional way while the edge and bell are left merely hammered. Masterwork describes crystal-clear stick definition with complex warm undertones, a crisp attack and a gong-like decay.

Updated 2026-09-24Sources

Lathed where it counts, raw where it counts

Masterwork is unusually specific about the geometry here: the middle and the underside get traditional lathing, and the edge and the bell are left with only the hammer marks.

That division is not arbitrary. The middle of the bow is where the stick lands on a ride, so lathing it brings up the clarity of the attack. The edge is where a cymbal crashes and where the longest, lowest modes live, so leaving it raw keeps the wash restrained. And an unlathed bell stays dark and compact instead of ringing.

Which explains the description

“Crystal-clear stick definition” comes from the lathed playing area. “Complex warm undertones” come from the raw edge. Both claims are consistent with where the two treatments have been applied, which is more than can be said for a lot of cymbal copy.

The gong-like decay

Masterwork’s own phrase, and it follows from an unlathed edge on a 20-inch cymbal. Without lathing to regularise the outer region, the low modes there are strong and slow, so when the cymbal is struck hard the decay has a swelling, tonal quality rather than a simple fade.

That is a real characteristic to plan around: crashed, this ride does something a fully lathed one does not.

Where it sits in the range

Masterwork positions Sehhar explicitly between Custom (fully worked, all-purpose) and Natural (hard hammered, unlathed). Hearing all three at 20 inches is the most direct way to understand what lathing does, because the blank and the tradition are held constant and only the surface changes.

No alloy or weight is published for any of the three, so neither is asserted here.

Specifications

Specifications
AttributeValue
Cymbal
TypeRide1
LathingMiddle and underside lathed traditionally; edge and bell merely hammered1
CharacterCrystal-clear stick definition, complex warm undertones, a crisp attack and a gong-like decay1
Series voicingA cross between the Custom and Natural series1
Ride sizes offered20, 21 and 22 inch1
AlloyB20 cast bronze1*Masterwork publishes no alloy on its series pages. This figure is not the maker's.
Origin
Made inTurkey2Masterwork gives its address as Esenyurt, Istanbul.
  • *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Sehhar series

    Masterwork Cymbals · accessed 2026-09-24

  2. 2Tier 1 · Primarymanufacturer spec

    Contact

    Masterwork Cymbals · accessed 2026-09-24