Drum Atlas
Menu

Masterwork · Natural

Masterwork Natural 20" Ride

  • Cymbal
  • pro
  • current

The Masterwork Natural 20" Ride is hard hammered and left unlathed. Masterwork describes an earthy sound with complex undertones and a pronounced but clear ping, with those characteristics traded for a light attack and a warm sustain — the raw-surface end of the maker's range.

Updated 2026-09-24Sources

Hard hammered, not lathed

Masterwork’s description of the process is two decisions. Hard hammering deforms the metal deeply, which lowers the pitch and breaks up the modes that would otherwise sustain together. Leaving the surface unlathed means none of that gets cut back afterwards.

Those two choices reinforce each other. A hard-hammered cymbal that is then lathed recovers some brightness and evenness; this one does not, which is why “earthy” is the first word the maker reaches for.

A pronounced but clear ping

That phrase is the interesting part of the specification, because raw cymbals are usually described as dry rather than clear. Masterwork is claiming both: the stick sound is definite, and it is legible rather than muddy.

On an unlathed 20-inch ride that is achievable because the wash is so restrained. With little sustained content competing, the attack has the field to itself.

Against the Custom ride

Masterwork makes a 20-inch ride in the fully worked Custom series too, and the pair is the comparison worth making. The Custom is warm, wide-spectrum and sensitive; the Natural is dry, narrow and articulate.

The maker is explicit that the Natural’s characteristics come at a cost — the description says they are “enhanced for a light attack and warm sustain”, meaning the series is tuned toward those rather than toward volume and projection.

Living with a raw surface

Unlathed cymbals mark and oxidise with handling, and the appearance changes over the first year. That is inherent to the finish rather than a defect. Masterwork publishes no weight or alloy for the series, so neither appears here as a specification.

Specifications

Specifications
AttributeValue
Cymbal
TypeRide1
LathingUnlathed1
HammeringHard hammered1
CharacterEarthy sound with complex undertones and a pronounced but clear ping; light attack and warm sustain1
Ride sizes offered20, 21 and 22 inch1
AlloyB20 cast bronze1*Masterwork publishes no alloy on its series pages. This figure is not the maker's.
Origin
Made inTurkey2Masterwork gives its address as Esenyurt, Istanbul.
  • *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Natural series

    Masterwork Cymbals · accessed 2026-09-24

  2. 2Tier 1 · Primarymanufacturer spec

    Contact

    Masterwork Cymbals · accessed 2026-09-24