Yamaha · YCH
Yamaha YCH7118 Chimes
The YCH7118 is Yamaha's large-tube chime set: 1½ in brass tubes covering C52 to F69, hung on a wire suspension system from a two-piece hanger beam. The larger diameter gives richer fundamentals, longer sustain and a wider dynamic range, and the frame will take up to 21 tubes in any arrangement.
Hollow tubes, struck at the cap
Chimes — tubular bells — are brass tubes hung vertically in a frame and struck on the cap at the top with a rawhide or plastic mallet. The tube does not have a harmonic series like a string; the pitch a listener hears is largely inferred from a cluster of inharmonic partials, which is why chimes sound like bells rather than like a metallophone, and why the head cap’s design matters so much to whether the pitch reads clearly.
Tube diameter is the specification
Yamaha makes two sets in this frame: the YCH6118 at 1¼ in and the YCH7118 at 1½ in. The larger tube gives a richer fundamental, longer sustain and more dynamic range, and Yamaha positions it for standing out in large ensembles. The tubes are brass under a clear lacquer, which keeps them from tarnishing without deadening them.
Damping a swinging tube
The tubes hang on wires and swing front to back when struck. A damper that moves in a different plane will catch them unevenly, and Yamaha aligned the damper’s movement with that swing so the sound stops when the pedal says so. The rod clamp holding the damper assembly was redesigned for grip, because a clamp that slips under pedal pressure gradually stops damping at all.
Any tube, anywhere
All the spaces in the frame can be used, for up to 21 tubes, and the position of the low C is not fixed — so special-order tubes and extended sets can be arranged as a player wants. The two rows have different clearances, and Yamaha documents which long and short tubes need to hang on which row for the damper to reach them.
Specifications
| Attribute | Value |
|---|---|
| perc | |
| Type | Chimes — tubular bells2 |
| Range | C52–F69, 1½ octaves2 |
| Tubes | Brass, 1½ in diameter, clear lacquer coating2 |
| Suspension | Two-piece hanger beam and rest with a wire suspension system1 |
| Damper | Damper movement aligned with the tubes' front-to-back swing; patent-applied-for rod clamp system1 |
| Capacity | Up to 21 tubes, in any arrangement1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 1 · Primarymanufacturer spec