
Deagan · Marimba
Deagan Marimba No. 352
The No. 352 was Deagan's 3½-octave marimba: F to C chromatic, 44 bars, 56¾ inches long and 35 inches high, with bars varying in width from 1⅝ to 2¼ inches and removable for packing. A plain rack was standard, the De Luxe Wheel Rack optional, and a 352-X version came with mahogany frames and Jap Bronze metalwork for home use.
Bars that change width across the range
One and five-eighths inches at the top, two and a quarter at the bottom.
This is the detail that distinguishes a properly designed mallet instrument from a scaled one. A bar’s pitch is set mainly by its length and thickness; its loudness and tone depend on how much surface it has to move air with.
Low bars are long and heavy and naturally quiet relative to short ones. Widening them as the range descends puts mass and radiating area back where it is needed, so the bottom octave speaks with the same weight as the top. Every serious marimba is graduated this way, and Deagan was doing it in 1925.
Against the Marimba-Xylophone
The catalogue puts the two instruments side by side, and its comparison is unusually candid: the Marimba’s tone is almost identical to the Marimba-Xylophone’s, without quite the volume.
That is a maker telling a customer the cheaper of two instruments sounds the same. The reason to choose the Marimba-Xylophone was projection, not colour.
What the catalogue recommends this one for is the low register with soft mallets, particularly in four-mallet playing — which is the marimba’s home ground and still is.
Three versions of the same instrument
The No. 352 came three ways, and the differences are all about where the instrument was going to live.
352 — plain rack. The working instrument. 352-D — De Luxe Wheel Rack. Rolls, for a stage or a pit where it is moved between numbers. 352-X — the De Luxe rack with mahogany frames and Jap Bronze finished metal parts, which the catalogue says is especially suitable for home use.
That last one is a piece of social history in a specification. A 56-inch marimba in a 1920s front room was furniture as well as an instrument, and Deagan finished it accordingly — dark wood and dark bronze rather than the bright nickel of a working instrument.
Bars that come off
Removable bars run through the whole Deagan range and the reason is the railroad.
A touring musician in 1925 shipped instruments as baggage, and baggage had weight limits and handling that assumed nobody cared. Bars off, in their own tray, inside a fitted trunk, is the only way a strung mallet instrument survives that.
It is also why the catalogue lists a trunk beside every instrument, with its own catalogue number and its own price.
Specifications
| Attribute | Value |
|---|---|
| Hardware | |
| Height | 35 in1 |
| Build | |
| Larger size in the line | No. 354 at 4 octaves, C to C chromatic, 49 bars1 |
| model | |
| Catalogue number | 352; 352-D with De Luxe Wheel Rack; 352-X in mahogany1 |
| perc | |
| Type | Marimba1 |
| Range | 3½ octaves, F to C chromatic1 |
| Bars | 44, removable for packing1 |
| Bar width | 1⅝ to 2¼ in, varying across the range1 |
| Total length | 56.75 in1*Read from the OCR of the scanned 1925 catalogue page, where the fraction is not crisp; the catalogue gives it as 56¾ in. |
| Rack | Plain rack standard; De Luxe Wheel Rack optional1 |
| Pitch | Universal Low Pitch A-440; special pitch at 10% extra1 |
| drum | |
| Against the Marimba-Xylophone | Almost identical in tone, with somewhat less volume1 |
- *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarycatalog scan
Deagan Marimbas and Xylophones, 1925 — Marimba No. 352-D, page 9