Drum Atlas
Menu

Deagan · Artists' Special

Deagan Artists' Special Xylophone No. 264

  • Concert percussion
  • vintage
  • vintage

The Artists' Special was Deagan's top xylophone, and the No. 264 is its four-octave size: C to C chromatic, 49 bars, 74¼ inches long and 35 inches high, on bars two inches wide and wider. Bars are mounted on the cord-and-supporting-post system and are removable for packing; a De Luxe Wheel Rack was standard equipment.

Updated 2026-09-24Sources

Cord and supporting post

The mounting system is the specification the catalogue leads with, and it is the one that separates a professional instrument from a student one.

A bar vibrates least at its nodes — the two points about a fifth of the way in from each end where the fundamental mode does not move. Support it anywhere else and you damp it. Deagan strings the bars on cord running through holes drilled at those nodes, carried on posts, so the bar touches nothing rigid anywhere along its length.

The catalogue’s own phrasing is that this permits the greatest degree of vibration, which is exactly right: the bar is hanging in air on a string, free to ring for as long as the wood will let it.

Bars are removable for packing, which on a 74-inch instrument going into a railway trunk is the difference between touring with it and not.

Two inches wide, and wider

Bar width is what makes this the Artists’ Special rather than the Professional.

The No. 264’s bars are two inches across and wider; the Professional No. 872, the same four-octave range, uses a narrower bar. A wider bar has more mass and more radiating surface, which means a louder note, a fuller fundamental and a longer sustain — and a bigger target for a running four-mallet passage.

The cost is length and weight. Four octaves at that width comes out at 74¼ inches, and the 4½-octave No. 266 in the same line grew long enough that Deagan had to split it in the middle so that one trunk would stay under the railroads’ 250-pound baggage limit.

Resonators tuned one at a time

Under each bar is a tube, and Deagan’s claim is that each one is individually tuned to the bar it augments.

A resonator is a closed pipe whose air column has its own pitch. Match it to the bar and it reinforces the note; miss and it either does nothing or fights it. Most makers cut resonators to a calculated length and accept the error.

Deagan fitted a patented adjustable cap in the bottom of each tube and set it at the factory after the bars were tuned and the instrument fully assembled — so the resonator was matched to the actual bar it would live under, in the actual instrument.

The ends of the resonator strips rest on wood rather than metal, which the catalogue describes as eliminating sympathetic vibration at those points. That is a lot of attention to a part most players never look at.

A-440, argued for early

The catalogue states all Deagan instruments are tuned to Universal Low Pitch A-440, and adds that J. C. Deagan proved it the true low pitch more than a quarter of a century before 1925.

That is a company being proprietorial about something which is now simply how the world works. Deagan campaigned for A-440 in the United States for decades, and a tuned-percussion maker had more at stake in the question than anyone: a xylophone cannot be retuned to suit an orchestra.

Special pitch was available, at ten per cent extra.

Specifications

Specifications
AttributeValue
Hardware
Height35 in1
Build
Sizes in the lineNo. 262 at 3½ octaves and 44 bars; No. 264 at 4 octaves and 49 bars; No. 266 at 4½ octaves and 56 bars1
model
Catalogue number2641
perc
TypeXylophone1
Range4 octaves, C to C chromatic1
Bars491
Bar width2 in and wider1
Total length74.25 in1*Read from the OCR of the scanned 1925 catalogue page, where the fraction is not crisp; the catalogue gives it as 74¼ in.
Bar mountingCord and supporting-post method, for the greatest degree of vibration; bars removable for packing1
RackDe Luxe Wheel Rack, standard equipment1
PitchUniversal Low Pitch A-440; special pitch at 10% extra1
ResonatorsIndividually tuned to the bar each augments, with a patented adjustable cap set at the factory after tuning1
Vibration insulationResonator strip ends rest on wood, to stop sympathetic vibration at those points1
  • *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarycatalog scan

    Deagan Marimbas and Xylophones, 1925 — Artists' Special Xylophone, page 5

    J. C. Deagan, Inc. · p. 5 · published 1925 · accessed 2026-09-24