Drum Atlas
Menu

Bergerault · Signature

Bergerault Signature Vibraphone BV30G

  • Concert percussion
  • flagship
  • current

The BV30G is Bergerault's three-octave Signature vibraphone, F3 to F6, on satin gold bars cut to Bergerault's vintage tuning at A = 442 Hz. It carries an arched damper pedal bar with a large central swivel, an ash-grey foldable wooden veined frame and sparkle anthracite resonators.

Updated 2026-09-24Sources

Vintage tuning

Bergerault specifies its bars as “vintage tuning”, which is a real distinction rather than marketing. A vibraphone bar is tuned by carving its underside so that overtones sit at chosen intervals above the fundamental — commonly the fourth partial two octaves up and the tenth partial three octaves and a major third up on a modern instrument. Older tuning practice placed them differently, which gives a warmer, less glassy bar with a slightly different attack. A player choosing a vibraphone is choosing between those schools as much as between makers.

An arched damper bar

The damper is the rail pressed against the underside of every bar, lifted by the pedal. Bergerault arches it and puts a large swivel at the centre, so the bar can find its own level against the whole keyboard rather than pivoting from one end. On an instrument where half-pedalling and selective damping are core technique, whether the damper touches the bottom and top bars at the same instant is exactly what the player feels.

Frame and motor

The frame is a foldable wooden veined construction in ash grey, with sparkle anthracite resonator tubes — an unusual combination of wood frame and dark metal that is Bergerault’s visual signature. The motor runs on 220 V with electronic speed variation, so the tremolo rate is set continuously rather than in steps. Playing height runs from 840 to 970 mm, and a cover and mallets are supplied.

Bars

58 mm wide at the bottom down to 38 mm at the top, a constant 13 mm thick. Satin gold or silver are offered on otherwise identical instruments. Three octaves, F3 to F6, is the standard vibraphone range that the overwhelming majority of writing for the instrument assumes.

Specifications

Specifications
AttributeValue
perc
TypeVibraphone1
Range3 octaves, F3–F61
BarsSatin gold finish, Bergerault vintage tuning1
Bar sizes58 to 38 mm wide, 13 mm thick1
PitchA = 442 Hz1
DamperUniquely arched damper pedal bar with a large central swivel1
ResonatorsSparkle anthracite tubes1
FrameAsh-grey foldable wooden veined1
Motor220 V with electronic speed variation1
Height840 to 970 mm1
model
ModelBV30G1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Bergerault 3.0 oct. Signature vibraphone — satin gold finish bars

    Bergerault Percussions · accessed 2026-09-24