
Majestic Percussion · Artist
Majestic Artist Series Vibraphone MJV7530
The MJV7530 is Majestic's three-octave professional vibraphone, F3 to F6, on anodised aluminium bars in gold or silver. Its pedal is wide with two pull rods and a trapezoidal damper, the motor speed is adjustable, and the height adjusts from both sides between 84 and 101 cm.
The pedal is the instrument
On a vibraphone the bars ring until they are stopped, so the damper bar — a felt-covered rail pressed against the underside of the bars — is doing musical work on every note. That makes the pedal mechanism far more important than it is on any other mallet instrument. The MJV7530 uses a wide pedal with two pull rods rather than one, so the damper lifts evenly across the whole instrument rather than tilting, and a trapezoidal damper profile to make the contact consistent from the low bars to the high ones. A damper that touches the low end before the high end makes half-pedalling unpredictable, and half-pedalling is a real technique.
Adjustable from both sides
The height adjusts from either side, between 84 and 101 cm. A vibraphone is heavy and awkward, and being able to set the height from wherever you are standing rather than walking round the instrument is the kind of small thing that gets used at every setup.
Gold or silver
Gold anodised bars with golden resonators, or silver anodised bars with black-lacquered resonators. Anodising builds an oxide layer into the aluminium surface, which is harder-wearing than a paint or plating and changes the bar’s surface characteristics slightly. Majestic offers the two as equal alternatives, distinguished by look — the gold instrument reads as exceptional presence, the silver as refined and expressive, in its own descriptions.
Three octaves, and a motor
F3 to F6 is the standard vibraphone range that almost all writing for the instrument assumes. The motor drives the discs in the resonator tops and its speed is adjustable, which is what produces the tremolo the instrument is named for. Bars graduate from 57 to 38 mm in four steps, and a drop cover and mallets come with the instrument.
Specifications
| Attribute | Value |
|---|---|
| perc | |
| Type | Vibraphone1 |
| Range | 3 octaves, F3–F61 |
| Bars | Aluminium alloy, gold or silver anodised1 |
| Bar width | 57 to 38 mm (2.25 to 1.5 in), in 4 graduations1 |
| Pitch | A = 442 Hz1 |
| Pedal | Wide, with dual-guided pull rods and a trapezoidal damper1 |
| Motor | 240 V, speed individually adjustable1 |
| Resonators | Offset arch; black lacquered on the MJV7530S, golden on the MJV7530G1 |
| Height adjustment | 84 to 101 cm, adjustable from both sides1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec