Vic Firth · World Classic
Vic Firth World Classic TMB1 Timbale
The Vic Firth TMB1 is a hickory timbale stick measuring 17 inches by .5 inches, with no taper and no tip. It is Vic Firth's largest timbale stick, and the absence of a taper and a bead is what makes it a timbale stick rather than a thin drumstick.
A stick with no tip and no taper
The specification is unusual enough to need stating plainly: Vic Firth publish no taper and no tip shape for this model. It is a plain dowel of hickory, .5 inches thick and 17 inches long, the same diameter from butt to end.
That is not a simplification. It is what the instrument requires.
Why timbales are played with a dowel
Timbales are shallow metal-shelled drums tuned very high, and the characteristic sounds are a rim shot, a shell strike and a stroke near the edge of the head. None of those involves a bead striking the middle of a drumhead.
A bead exists to control the contact patch on a head and a cymbal. Remove that job and the bead becomes dead weight at the wrong end of the stick.
A taper exists to tune the balance and the rebound. On a timbale part, built from rapid rim work and cáscara patterns, an even-diameter shaft that responds identically along its length is more useful than a balanced stroke weight.
So a timbale stick is a cylinder, and it is one for good reasons.
Big, for the category
At .5 inches and 17 inches this is Vic Firth’s largest timbale stick, and they describe it as their boldest — for players who want extra reach and power.
Note how those numbers read against a drum kit stick. Half an inch is thinner than almost any kit stick, and 17 inches is longer than almost all of them. A long, thin, untapered dowel flexes a great deal, which is part of how a timbale player gets speed out of it.
Against the TMB2
The TMB2 is .47 by 16.5 — the smaller and more conventional of the pair. The TMB1 is the one you choose for volume.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec