Vic Firth · Signature Series
Vic Firth Danny Carey Signature
The Vic Firth SDC is a hickory drumstick measuring 16.5 inches by .63 inches with a teardrop wood tip and a short taper. It is shaped at three points rather than one: a cut-in grip section, a short front taper and a tapered butt end.
Shaped at both ends and in the middle
Most sticks are a cylinder with one taper at the front. The SDC has three separate pieces of geometry.
A cut-in section at the gripping area — the shaft is reduced where the hand sits. That gives a positive location for the fingers, so the stick sits in the same place every time without being squeezed.
A short front taper, which keeps mass forward for power and leaves a thick neck behind the bead.
And a tapered butt end, which removes weight from behind the hand and moves the balance point forward.
Why all three at once
The three changes are not independent. Cutting into the grip area removes wood from the middle, and tapering the butt removes more from the back. Both shift the balance toward the front, which on a .63-inch, 16.5-inch stick is already a great deal of stick.
The result is a heavy implement that is unambiguously front-weighted — a design for driving drums rather than riding cymbals, and one that gives back relatively little rebound.
The size, in context
At .63 inches it matches the American Classic Rock model, and at 16.5 inches it is half an inch longer than a 2B. This is in the top handful of Vic Firth’s kit sticks for sheer mass.
The teardrop bead is the conventional part of the specification, and on a stick this size it keeps the cymbal sound from becoming as broad as the shaft would suggest.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec