Vic Firth · Corpsmaster Snare
Vic Firth Corpsmaster Signature Ralph Hardimon Hammer
The Vic Firth SRH2 Hammer is a laminated birch marching snare stick measuring 16.875 inches by .695 inches with a long taper and a barrel tip. Vic Firth build it in Sta-Pac, a dense laminate, which they specify for added weight and durability.
Sta-Pac, and why laminate at all
Vic Firth’s Sta-Pac is birch built up from bonded layers rather than turned from a single billet, and it is denser than solid hickory. Two consequences follow, and both are the reason the stick exists.
Weight without width. Density means mass can be added without the shaft getting any thicker, so the stick stays the size a hand expects while hitting like something larger. At .695 inches this is not an unusually wide marching stick; it is an unusually heavy one.
Consistency. A solid stick’s weight and stiffness depend on where in the tree it came from, so pairs have to be matched. Laminate averages the grain out, and sticks from a laminated billet are far more alike than sticks from solid wood — which matters most in a section playing in unison.
The same argument puts laminated birch in Vic Firth’s Symphonic Collection, where matching matters for the same reason.
A scaled-down Hardimon
Vic Firth describe the SRH2 as a reduced version of Hardimon’s original SRH, rebuilt in the heavier material. The dimensions come down and the density goes up, so the stick ends up near the original’s weight in a smaller package.
Hardimon’s long taper and barrel bead carry over, so the balance and the contact patch are familiar. What changes is the feel of the material itself: laminate is stiffer than solid hickory and transmits more of the stroke to the hand.
What laminate costs
Give. Solid hickory flexes slightly and takes the edge off a hard impact; a dense laminate does not, so more of every rimshot arrives in the fingers. Players coming from the solid SRH notice it in the first rehearsal.
Specifications
| Attribute | Value |
|---|---|
| stick | |
| Model | SRH21 |
| Length | 16.875 in1 |
| Diameter | .695 in1 |
| Wood | Laminated Birch1 |
| Tip shape | Barrel1 |
| Tip material | Wood1 |
| Taper | Long1 |
| Finish | Lacquer1 |
| Designed with | Ralph Hardimon1 |
| Intended use | Marching snare and drum corps1 |
| Material | Sta-Pac dense laminate1 |
| Construction | Laminated rather than turned from one piece1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec