Vic Firth · Corpsmaster
Vic Firth Corpsmaster MS2 Marching Snare
The Vic Firth Corpsmaster MS2 is a hickory marching snare stick measuring 17 inches by .695 inches with a full oval wood tip and a short taper. It is the MS1 with half an inch added, which is the most common way a marching player asks for more power.
Half an inch of leverage
The MS2 shares every figure with the MS1 except length: 17 inches instead of 16.5, at the same .695-inch diameter, the same short taper and the same full oval bead.
That is a deliberately narrow change. On a field snare the stick’s diameter is set by what the head needs; it is not a comfort dial. Length, by contrast, is a free variable, and it multiplies tip speed for a given wrist motion.
More leverage, more velocity, more sound out of the same hands.
Why length rather than width
Adding width to a marching stick quickly runs into the hand. These sticks are already far thicker than anything used on a kit, and rudimental technique requires a precise grip that a fatter shaft starts to compromise.
Adding length leaves the grip untouched. The stick simply becomes a longer lever, which is why marching lines tend to offer the same gauge at two or three lengths.
The cost is that a longer stick is heavier at the far end and slower to change direction, which shows up in fast rudimental passages before it shows up anywhere else.
The rest of the specification
Short taper, so the mass stays forward and the neck stays thick — the durable, power-oriented choice, and the right one for a very tight head.
Full oval tip, spreading the contact patch to bring up the lower partials and soften the attack, which keeps a Kevlar head from sounding purely percussive.
Choosing between MS1 and MS2
Arm length and line preference, mostly. A taller player or a line that wants maximum projection will lean toward the MS2; a shorter player or one working on speed will usually be happier on the MS1.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec