Vic Firth · American Classic
Vic Firth American Classic Metal
The Vic Firth American Classic Metal, model CM, is a hickory drumstick measuring 17 inches by .635 inches with an oval wood tip and a short taper. It is the longest and thickest stick in the American Classic line, built for reach and power at high volume.
The big end of the line
Seventeen inches and .635 of an inch. Nothing else in the American Classic range is both this long and this thick, and the combination is deliberate rather than incidental.
Set it against the 2B, the traditional heavy stick, at 16 inches and .630. The Metal is a full inch longer at essentially the same diameter. That inch is where all the extra leverage comes from: a longer lever arm turns the same wrist motion into a faster tip and a harder strike.
Set it against the SD1 General, which is the same .635 diameter in maple. The two sticks measure almost identically and feel nothing alike, because hickory is far denser than maple. It is the clearest reminder on this page that diameter is not weight.
Short taper, and why a heavy stick wants one
The taper is the section where the shaft narrows toward the tip, and it decides where the mass sits.
A short taper leaves more wood out in front of the hand. That makes the stick front-heavy, which is exactly what you want when the job is moving air: more of the stick’s mass arrives at the head, and there is more wood at the shoulder to survive rimshots.
The trade is rebound. A front-heavy stick gives less back, so fast passages cost more effort. This is not a stick for a buzz roll at pianissimo, and it is not trying to be.
The oval tip
Larger contact patch than a teardrop, so more of the cymbal moves on each stroke. The result is a fuller, broader sound with less of a defined point to it — which in a dense mix is what lets a crash cut without sounding thin.
It is also the most forgiving shape when strokes land at inconsistent angles, which they do at volume.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec