
Salyers Percussion · Performance Collection
Salyers Percussion PCX3
The PCX3 is a Performance Collection unwound keyboard mallet with a one-inch Lexan ball on rattan, which Salyers describes as producing a clear, beautiful tone with very little contact sound. The collection runs the same head materials in 1, 1⅛ and 1¼ inch diameters, and Salyers names the rattan size as what sets the series apart.
Contact sound, and why Lexan
Strike a xylophone bar with a hard mallet and you hear two things: the bar, and the click of the mallet hitting it. The second is called contact sound, and controlling it is most of what unwound mallet design is about.
A harder head transmits more energy into the bar and produces a brighter, louder note — and a louder click. A softer head kills the click and takes the top off the note with it.
Lexan is polycarbonate: hard, but tough rather than brittle, with enough internal damping to absorb the initial impact transient while still being stiff enough to drive the bar. That is the combination Salyers is claiming — a clear tone with very little contact sound.
Against the collection’s other one-inch heads, the difference is entirely in that trade. The PCX1’s poly ball is softer and rounder, aimed at quiet glockenspiel and general xylophone; the PCX2’s PVC is the general glockenspiel answer; the Lexan sits at the clear, articulate end.
One inch
A keyboard mallet’s diameter changes how much of the bar it excites.
A small head concentrates the strike into a small area and favours the bar’s upper partials: bright, articulate, defined. A large head spreads the contact and drives more of the fundamental: fuller and rounder, with less edge.
One inch is the middle of Salyers’s three, with 1⅛ and 1¼ above it. Running the same materials across three diameters rather than offering one size per material is what makes the Performance Collection a grid rather than a list — the player picks a hardness and a size independently.
The rattan is the point
Salyers’s own claim about the collection is unusual: what sets it apart from any other series available is the rattan size.
Not the heads. The shafts.
Rattan is a climbing palm, and as a mallet handle it is chosen because it flexes. That flex is what lets a player get a full sound out of a bar without a hard arm stroke: the shaft loads on the way down and unloads into the bar, and it damps the shock coming back.
How much it flexes depends on its diameter, and a thicker rattan shaft is stiffer, faster and more controlled while a thinner one is looser and more forgiving. A maker singling out shaft gauge as its differentiator is saying the feel of the stroke was designed before the sound of the head was chosen.
Where it fits
Advanced concert percussion, and the reason the Performance Collection exists alongside the Etude Series: Etude is birch shafts and a standard poly ball at a price a school can order in bulk, and this is rattan and a chosen head material for someone who knows which one they want.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec