Tama · Signature
Tama Lars Ulrich Signature
The Tama Lars Ulrich Signature (LU1465) is a 14 × 6.5-inch snare drum on a 3mm diamond-plated steel shell. Three millimetres is roughly three times the wall of an ordinary steel snare, and the raised diamond pattern breaks up the shell's surface as well as its appearance.
Three millimetres of steel
Most steel snare shells are one millimetre or a little more. Three is an enormous departure: the shell is heavy enough that it barely deforms under a stroke at all, and essentially everything the stick puts in comes back out of the head.
The consequences are predictable and extreme. The drum is very loud, the attack is very hard, and the fundamental sits lower than a thin steel drum’s because the cylinder is no longer contributing its own high resonance.
Diamond plate
The raised diamond pattern is a tread plate, borrowed from industrial flooring, and it is the reason the drum is recognisable across a stage. It is also not purely cosmetic: a patterned surface is stiffer in some places than others, which spreads out the shell’s resonances in the same way hammering does.
At 3mm there was not much ring left to break up, but the effect points the same way as everything else on this drum.
What it is for
Large stages and loud music, played hard. Tama’s own description is of an aggressive appearance and an aggressive sound, and the specification does not argue with it.
For a steel drum with more range and less commitment, the S.L.P. steel snares sit at 1.2mm and behave very differently.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec