Sonor · Signature
Sonor Gavin Harrison Signature
The Sonor Gavin Harrison Signature is a 6-ply, 6mm hand-selected birch snare drum offered at 14 × 5.25 and 12 × 5, with a vintage rounded batter edge and a 45-degree snare edge, S-Hoops on top and an open triple-flanged steel hoop below. It ships with three interchangeable wire sets.
Two different bearing edges
The batter side is cut as a vintage rounded edge; the snare side is a modern 45. Sonor’s stated reason for the 45 underneath is crispness, and the logic holds: a sharp edge under the resonant head gives the wires a fast, defined surface to work against, while the rounded batter edge keeps the stroke itself broad and warm.
It is a drum designed from the two heads inwards rather than from the shell outwards.
Three wire sets, not one
The three sets that ship with the drum are genuinely different instruments rather than spares. Straight 8 is eight stainless strands in the usual central arrangement. EQ is eight bronze strands set off-centre, which changes which part of the head the wires load. Spacer is eight brass strands of varying diameter and spacing, so the individual wires respond at different rates.
Eight strands is a very light set by modern standards, and that is the common thread: this is a drum built for the wires to be heard as individual voices rather than as a single buzz.
Hoops and dampening
S-Hoops on the batter side — a pressed steel hoop with a rolled outer edge that protects sticks — and a deliberately open triple-flanged hoop below, so the snare-side head is clamped as little as possible.
Three dampening rings in light, medium and heavy widths complete the set. Like the wires, they make the drum’s character a set of choices rather than a fixed sound.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Hand-selected birch1 |
| Plies | 61 |
| Shell thickness | 6 mm1 |
| Bearing edge | |
| Bearing edge | Vintage rounded on the batter side, 45° on the snare side1 |
| Hardware | |
| Hoops | S-Hoops on the batter side, open triple-flanged steel on the snare side1 |
| Dampening | Three dampening rings — light, medium, heavy1 |
| Snare side | |
| Snare wires | Three sets: Straight 8 stainless, EQ bronze off-centre, Spacer brass1 |
| Origin | |
| Made in | Germany1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec