
Slingerland · Radio King
Slingerland Radio King Artist Snare
The Slingerland Radio King Artist Snare is a 14-inch drum built at 5.5 and 6.5 inches deep on a 3-ply mahogany/poplar/mahogany shell with maple reinforcement rings and a 30-degree bearing edge. It carries nickel-plated Stick Saver hoops, Streamline lugs, the Zoomatic throw-off and 20-strand wires.
Not the solid shell
The Radio King name is attached to two quite different drums. The one that made the name is a single-ply steam-bent solid maple shell — Gene Krupa’s drum, and one of the very few genuinely distinctive shell designs in the instrument’s history.
The Artist Snare is not that. It is a three-ply mahogany/poplar/mahogany shell with maple reinforcement rings: the construction Slingerland used across its ordinary professional drums, and the same shell format as the current Radio King outfits.
Worth being clear about, because the price difference between them is large and the name is shared.
What a three-ply shell does
Three plies with re-rings is a thin, soft build. Mahogany on both faces darkens the note; poplar in the core keeps it light; the maple rings hold the edge true and add definition exactly where the head meets the shell.
With a 30-degree rounded edge on top of that, the drum is warm, open and low for its size, and very responsive to a light stroke.
The hardware is period-correct
Stick Saver hoops — Slingerland’s hoop with a raised outer edge that catches a glancing stick — Streamline lugs, and a re-tooled Zoomatic throw-off, all nickel plated rather than chromed. Nickel is softer and warmer-toned than chrome and is what these drums wore originally.
Built in Oxnard, California, in six finishes across the two depths.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Mahogany/poplar/mahogany, with maple re-rings1 |
| Plies | 31 |
| Reinforcement rings | 100% maple1 |
| Bearing edge | |
| Bearing edge | 30°1 |
| Hardware | |
| Hoops | Stick Saver, nickel plated1 |
| Lugs | Streamline1 |
| Throw-off | Zoomatic, re-tooled lever and knob1 |
| Snare side | |
| Snare wires | 20-strand1 |
| Origin | |
| Made in | United States1 |
| model | |
| Models | SLSD5514, SLSD65141 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec