SJC Custom Drums · Slam
SJC Slam Can
A 6.5 by 10 in snare built for modern heavy music, designed with Jesse Yen of Snuffed On Sight. The shell is an unusually thick ten-ply maple, and a two-inch vent lets air out fast so each hit lands as a sharp crack. Matte black lacquer inside and out, with a Gibraltar piccolo throw-off.
A vent doing real work
The 2 in vent hole is the design. A 10 in shell at 6.5 in deep is a lot of enclosed air for a small diameter, and a conventional vent leaves that air fighting the head. Opening it up lets the shell empty quickly, which is what produces the immediate crack SJC is after while leaving enough sustain to hear.
The rest of the specification pushes the same way. Ten plies of maple is a heavy wall for a drum this size, and a heavy wall on a small shell gives a thick, focused note rather than a ringing one.
Where it came from
SJC credits Jesse Yen of Snuffed On Sight, and describes the drum as a response to the tight, high-impact snare sounds that have become standard in the heavier end of modern metal. Matte black lacquer runs inside the shell as well as outside, which seals the interior and keeps the drum visually of a piece. Badges come in five colours.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Maple1 |
| Plies | 101 |
| Construction | Extra-thick 10-ply maple1 |
| Venting | Single oversized 2 in vent1 |
| Finish | Matte black lacquer, interior and exterior1 |
| Hardware | |
| Hoops | 2.3 mm1 |
| Throw-off | Gibraltar piccolo1 |
| Origin | |
| Made in | United States1 |
| model | |
| Designed with | Jesse Yen of Snuffed On Sight1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec