Drum Atlas
Menu

Rogers · Tower

Rogers Tower Uptown

  • Snare drum
  • pro
  • current

The Rogers Tower Uptown is a 6 × 13-inch snare drum on a contemporary 5-ply maple shell with reinforcement rings, a 45-degree bearing edge, 2.3mm hoops, Beavertail lugs and the Swivo-Matic throw-off, finished in satin birch veneer and badged PowerTone.

Updated 2026-09-24Sources

A 45-degree edge on a Rogers

Rogers’ vintage drums were cut with rounded edges over reinforcement rings, which is a large part of why they sound the way they do. The Tower Uptown keeps the thin five-ply shell and the rings and then cuts a modern 45-degree edge into them.

That is a deliberate hybrid. The rings and thin wall give the shell’s own warmth and movement; the sharp edge restores the definition at the attack that a rounded edge softens.

Rogers describes the intent as fast response, clarity of sticking and fat throaty tones across a wide tuning range, which is a reasonable account of what the combination does.

Thirteen by six

A 13-inch drum at 6 inches deep sits noticeably above a 14 in pitch while keeping enough air to produce a fundamental. As a main snare it gives a higher, tighter backbeat; as a second snare next to a 14 it answers cleanly rather than merely being smaller.

Named for its era, badged for another

The Tower name belonged to Rogers’ student drums; the badge on this one says PowerTone, which was the professional model below the Dyna-Sonic. The Swivo-Matic throw-off is the company’s own long-running design, and the Beavertail lug is the shape most associated with Rogers’ Cleveland and Dayton years.

Specifications

Specifications
AttributeValue
Shell
Shell materialMaple, with reinforcement rings1
Plies51
Reinforcement ringsFitted1
Bearing edge
Bearing edge45°1
Hardware
Hoops2.3mm1
LugsBeavertail1
Throw-offSwivo-Matic1
model
ModelTWR-23-SBV1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Tower Uptown Snare

    Rogers Drums USA · accessed 2026-09-24