
Rogers · Dyna-Sonic
Rogers Builder's Choice
Rogers Builder's Choice drums are individually numbered Dyna-Sonics on 5-ply maple/poplar shells with reinforcement rings, ten Beavertail die-cast lugs, 1.6mm triple-flanged hoops on both sides, the Clock Face throw-off and the floating snare rail. Each is released as a single finish.
One drum at a time
Builder’s Choice is not a model so much as a numbered release. Rogers builds a single Dyna-Sonic to a chosen finish, catalogues it by its serial number, and sells it; when it is gone the number is gone.
Three have been listed so far — D3106, a 5 × 14 in Natural Maple Gloss; D3121, a 6.5 × 14 in the same finish; and D2945, a 6.5 × 14 in Tobacco Burst Gloss. The first two are sold out.
The shell underneath
Five plies of maple and poplar with reinforcement rings, which is the classic Dyna-Sonic construction rather than a special one. The combination is thin and comparatively soft, and it is the reason a Dyna-Sonic responds to a light stroke the way it does.
The interiors are stained fruitwood rather than sealed clear — a period detail, and one of the few places these drums differ visibly from the standard model.
Light hoops, both sides
1.6mm triple-flanged hoops top and bottom. A light snare-side hoop matters more than a light batter hoop on a Dyna-Sonic, because the floating rail depends on the resonant head being free to move; clamping it with a heavier rim would work against the mechanism.
Each drum carries both the Rogers script logo and the Dyna-Sonic oval badge.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Maple/poplar, with reinforcement rings1 |
| Plies | 51 |
| Interior finish | Fruitwood stain1 |
| Hardware | |
| Hoops | 1.6mm triple-flanged, 10 lug, batter and snare side1 |
| Lugs | 10 Beavertail die-cast1 |
| Throw-off | Clock Face; Swivo-matic on the first drum1 |
| Snare side | |
| Snare system | Floating snare rail1 |
| model | |
| Drums released | D2945, D3121, D31061 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec