Philadelphia Drum Company · Tri-Wood
Philadelphia Drum Co Tri-Wood Stave Snare
A stave shell built from three Pennsylvania hardwoods at once — walnut, cherry and maple, alternating around the shell. The staves are hand-joined and turned, then given the shop's rounded outer edge over a 45-degree inner cut, with black nickel die-cast tube lugs and an INDe strainer. Catalogued at 12 by 5.75, 13 by 5.5, 14 by 6.5 and 14 by 7.25 in.
Three woods in one shell
A stave shell is assembled from individual strips, which makes mixing species trivial in a way it is not for a ply or steam-bent shell. Philadelphia Drum Co uses that to build a wall of walnut, cherry and maple together: walnut for warmth and low end, maple for brightness and projection, cherry sitting between them.
Acoustically it is a blend rather than three separate voices — the shell vibrates as one — but the mixture changes the average density and stiffness of the wall, and it is visible from across a room.
Four sizes, including two small ones
The catalogued Tri-Wood drums run from a 12 by 5.75 in through a 13 by 5.5 to two 14 in drums at 6.5 and 7.25 in deep. Small-diameter stave snares are unusual because the staves have to be narrower and the joints multiply, so a 12 in build says something about the shop’s joinery.
Black nickel die-cast tube lugs, stick saver hoops and the INDe Premium strainer complete it.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Walnut, cherry and maple1 |
| Construction | Handmade solid stave shell in three alternating species1 |
| Bearing edge | Hand-carved rounded outer edge with a 45-degree inner cut1 |
| Hardware | |
| Lugs | Black nickel die-cast tube lugs1 |
| Hoops | Stick saver1 |
| Strainer | INDe Premium, with matching butt plate1 |
| Snare side | |
| Snare wires | PureSound Custom1 |
| Origin | |
| Made in | United States — Philadelphia, Pennsylvania1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec