
Noble & Cooley · Walnut
Noble & Cooley Walnut Ply Snare
A walnut ply snare with every ply laid horizontally, built from a design Noble & Cooley did not originate — Ian Witt of Witt Percussion drew it, and handed it on. Eight lugs as standard, symmetrical vent holes, and the company's cam-action snare system. Sizes run 13 and 14 in diameter in 4.75, 6.5 and 8 in depths.
A design the company bought rather than drew
Noble & Cooley has been making drum shells since 1854 and states openly that this is the first time in its history it has offered a drum it did not design. The walnut ply snare is Ian Witt’s work — the company met him at NAMM, was intrigued, ran a limited batch that sold out, and went back to talk about a longer arrangement. Witt wanted to concentrate on his Erie Drum business, and both sides agreed that Noble & Cooley was the right place for the design to continue. The drums are now built in Granville on the company’s own equipment, to Witt’s specifications.
Horizontal plies, and holes with a reason
Every ply runs horizontally — around the shell rather than alternating — which is the core of the Witt approach. Walnut is the softer, darker end of the shell woods, and eight lugs rather than ten keep the shell loaded lightly.
The venting is the other detail worth noticing. Rather than drilling one hole where the badge has to go, the company placed several vents symmetrically around the shell after testing where they made a difference. If holes are going in, the reasoning runs, they may as well be doing something.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Walnut1 |
| Construction | Walnut ply with all plies laid in horizontal orientation, to the Witt Percussion design1 |
| Venting | Multiple symmetrically placed vent holes1 |
| Hardware | |
| Lugs | 8 double-post tube lugs standard, 10 optional; chrome or black, brass as an upgrade1 |
| Hoops | Triple-flanged chrome or black standard; brass, die-cast and wood offered1 |
| Snare side | |
| Snare system | Noble & Cooley patented cam-action wires with brass throw-off1 |
| Origin | |
| Made in | United States — Granville, Massachusetts1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec