
Mapex · Black Panther
Mapex Black Panther Metallion
The Mapex Black Panther Metallion is a 14 × 5.5-inch snare drum on a 1.2mm seamed brass shell with staggered offset locking lugs, Sonic Saver hoops and a rolled, moulded SONIClear 45-degree edge. It is the smooth-shell brass drum in the range — bright, loud and long-ringing at standard depth.
Brass at the standard depth
Brass is the densest of the common snare shell metals, and at 1.2mm on a 14 × 5.5 it produces the sound most people picture when they think of a metal snare: a bright, projecting attack with a clear pitch and a long, singing tail behind it.
The Metallion leaves the surface smooth rather than hammering it, so none of that tail is broken up. It is the loudest way this range gets without adding depth.
Staggered lugs on a metal shell
The offset lug arrangement matters more on metal than on wood. A rolled shell has a seam and is never perfectly uniform, and pulling on ten points spread over two horizontal lines rather than one loads it more evenly at high tension.
That is worth having on a brass drum, which is usually tuned up rather than down.
Living with it
Loud rooms suit it; close microphones want a little damping. A single moongel or a light dampening ring shortens the tail without touching the attack, which is the usual way this kind of drum is tamed in a studio.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Seamed brass1 |
| Shell thickness | 1.2 mm1 |
| Bearing edge | |
| Bearing edge | Rolled and moulded SONIClear 45°1 |
| Snare bed | 2.3 mm1 |
| Hardware | |
| Lugs | Staggered 1/8 offset locking B-lugs, 4 air vents1 |
| Hoops | Sonic Saver1 |
| Throw-off | Cylinder-drive strainer with micro-lock tension adjustment1 |
| model | |
| Model | BPNBR4551CN1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec