
Mapex · Black Panther
Mapex Black Panther Heritage
The Mapex Black Panther Heritage is a 14 × 6-inch snare drum on a thin 5-ply, 5mm maple shell reinforced with 4-ply, 4mm walnut re-rings — the only Black Panther wood snare built the old way, with a thin cylinder stiffened at the edges rather than a thick one.
Thin shell, stiff edges
Before makers could reliably glue up thick multi-ply cylinders that stayed round, the standard construction was a thin shell with separate reinforcement rings at each end. The rings held the bearing edge true; the thin middle was free to move.
The Heritage is built that way on purpose. Five plies of maple at 5mm is thin by any modern standard, and the 4-ply walnut re-rings do the structural work the shell no longer has to.
What that gets you
A thin shell with stiff edges is more responsive at low volume than a thick one, because the cylinder itself contributes to the sound rather than just reflecting it. The note has more shell colour in it and a slower, warmer decay.
Using walnut for the rings rather than maple is the interesting detail: the rings sit right where the head meets the shell, so a darker wood there takes a little of the edge off the attack.
Against the rest of the line
Where the Scorpion and the Solidus reject the room, the Heritage joins it. Six inches gives it enough body to be a main snare, and it is the Black Panther drum that flatters a light touch most.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Maple, with walnut reinforcement rings1 |
| Plies | 5 — 5mm maple shell with 4-ply, 4mm walnut re-rings1 |
| Reinforcement rings | 4-ply, 4mm walnut1 |
| Bearing edge | |
| Bearing edge | SONIClear 45°1 |
| Snare bed | 2.7 mm1 |
| Hardware | |
| Lugs | In-line locking B-lugs, 3 air vents1 |
| Hoops | Sonic Saver1 |
| Hardware finish | Chrome1 |
| model | |
| Model | BPNML4600CWD1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec