Ludwig · Signature
Ludwig Nate Smith Signature
The Ludwig Nate Smith Signature is a 5 × 14-inch snare drum on a 7-ply North American maple shell with a 45-degree bearing edge, ten brass tube lugs, brass die-cast hoops and a brass P88 throw-off. It is limited to 200 drums, built at Ludwig's Monroe, North Carolina plant.
Brass hardware on a maple shell
The shell is a conventional 7-ply North American maple at the standard 5 × 14. What is not conventional is that every piece of hardware on it is brass — the tube lugs, the die-cast hoops, the P88 throw-off and the P35 butt plate.
Brass is denser than the steel or aluminium those parts are normally made from, and on a snare drum that mass sits directly on the shell and on the head’s edge. Brass die-cast hoops in particular are heavier than cast aluminium ones, and they damp the head edge harder.
What the combination does
A thin-ish maple shell gives body and a broad note; heavy brass hoops tighten the edge and shorten the decay; tube lugs keep the middle of the shell free to ring. The drum ends up with a maple fundamental and a metal drum’s definition at the rim.
The artist’s own description — crisp attack, projection, a bright warm tone — is a reasonable summary of a 5-inch maple drum treated this way.
Limited run
Two hundred drums worldwide, each autographed, built at Ludwig’s Monroe, North Carolina facility and finished in a painted Custom Blue Imperial Coat rather than a lacquer or wrap. Evans G1 Coated over Hazy 300 is the factory head pairing.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | North American maple1 |
| Plies | 71 |
| Bearing edge | |
| Bearing edge | 45°1 |
| Hardware | |
| Lugs | 10 brass tube lugs1 |
| Hoops | Brass die-cast1 |
| Throw-off | P88, brass1 |
| Butt plate | P35, brass1 |
| Heads | |
| Batter head | Evans G1 Coated1 |
| Snare-side head | Evans 300 Hazy1 |
| Origin | |
| Made in | United States1 |
| model | |
| Model | LS401TDNSB1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec