Drum Atlas
Menu

Le Soprano · Bionic

Le Soprano Bionic Snare

  • Snare drum
  • custom
  • current

The Bionic is Le Soprano's hybrid snare, combining the free-floating shell of the Prima Original with the high-density shell construction of the shop's Pro series. Shells are maple or birch, hoops brass or die-cast, and size is set per order — 14x6.5 and 12x7 are among the drums Le Soprano shows. It is handbuilt in Bergamo.

Updated 2026-09-24Sources

Free-floating, and what that means here

A free-floating shell carries none of the tuning load. The hoops pull against a separate frame or against each other, and the shell sits inside doing nothing but vibrating.

The usual argument for it is that a shell under compression cannot move freely, so taking the tension off should let it ring. The usual argument against is that a shell touching nothing needs somewhere to attach the strainer and the air vent, and every solution adds parts.

Le Soprano developed the idea on its Prima Original line. The Bionic keeps it and adds the other half of the equation.

High density, against the grain of free-floating

The Pro series contribution is a high-density shell, and combining that with a free-floating mount is a less obvious pairing than it looks.

Free-floating is usually paired with a thin, light shell — the logic being that if you have gone to the trouble of releasing the shell, you want one that moves. A dense shell moves less by definition.

What a dense shell gives instead is projection and a defined fundamental: more energy returned to the head rather than absorbed, a higher shell resonance, a shorter decay. Freeing it from tuning compression then lets that happen evenly all the way round the drum instead of being pinched at the lugs.

The name is doing some work. A bionic thing is two systems that were not designed together, made to work as one.

Maple or birch, brass or die-cast

The two shell woods are the two poles. Maple is even and full; birch is scooped in the mids with more top and bottom.

The hoop choice matters more on this drum than on most. Die-cast is heavy and stiff, holding tuning and tightening the rimshot. Brass is denser than steel but softer than cast zinc, and it rings — a brass hoop adds a bright sustained component to every rimshot that a die-cast hoop suppresses.

On a free-floating drum both are pulling against the shell’s isolation rather than through it, which makes the difference between them easier to hear than it would be on a conventional build.

Made in small numbers

Le Soprano is a small Italian shop and says so: the Prima Original line runs to six or eight kits a year.

Italy is far better known in this catalogue for cymbals than for shells, and a bespoke drum builder there is a rarity. The Bionic is the shop’s own engineering rather than a variation on somebody else’s, which is what makes it worth recording.

Specifications

Specifications
AttributeValue
Shell
Shell constructionFree-floating shell of the Prima Original with the Pro series high-density shell1
Shell materialMaple or birch1
FinishesLacquered sparkle among the options1
Hardware
HoopsBrass or die-cast1
Build
ConfigurationSize, colour and hardware specified per order1
Origin
Made inItaly — Bergamo2*Le Soprano's product pages do not state the town; the company's contact details place the workshop in the Bergamo area.
  • *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Bionic Snare

    Le Soprano · accessed 2026-09-24

  2. 2Tier 1 · Primarymanufacturer spec

    Snare and Drums Set

    Le Soprano · accessed 2026-09-24