Drum Atlas
Menu

Independent Drum Lab · Kalamazoo

INDe Kalamazoo Series Snare

  • Snare drum
  • custom
  • current

Hand-rolled and riveted metal shells in aluminium or brass, carrying INDe's patented Infinite Snare Bed. Seven sizes are offered, from a 3.75 by 13 in through to an 8 by 14 and a 5.5 by 15 in. Built up with the shop's low-mass lugs and the SB1 strainer, in a brushed and lacquered finish.

Updated 2026-09-24Sources

Rolled and riveted, not welded

A metal snare shell is usually welded and the seam ground away, or spun seamlessly from a disc. INDe rolls these by hand and rivets the seam, which is how metal drums were made before welding became routine. A riveted lap joint leaves a slight discontinuity in the shell, and that is not an accident — it changes how the shell rings.

The patented part

The Infinite Snare Bed is the shop’s own geometry, covered by US patent 10,699,682, and INDe makes a specific claim for it: an unusually wide tuning range, with snare response and sensitivity held across it. The bed is where a snare drum either works at extremes or stops working, so a maker putting its patent there rather than in a throw-off is a meaningful choice.

A wide size list

Seven sizes are catalogued, including two piccolos at 3.75 in and a 15 in drum — sizes that only make sense if the shell design really does hold up away from the 14 by 5.5 in centre of the market. Fitted with the low-mass INDe lugs and the SB1 strainer throughout.

Specifications

Specifications
AttributeValue
Shell
Shell materialBuyer's choice — aluminium or brass1
ConstructionHand-rolled and riveted shell1
Snare bedInfinite Snare Bed, US patent 10,699,6821
FinishBrushed and lacquered1
Hardware
LugsINDe low-mass1
StrainerINDe SB11
Origin
Made inUnited States — Kalamazoo, Michigan1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Kalamazoo Series Snare Drums

    Independent Drum Lab · accessed 2026-09-24