
Independent Drum Lab · Flex-Tuned
INDe Flex-Tuned Maple Snare
A 4.5 mm five-ply maple shell built to flex in one direction and stay stiff in the other: three thick horizontal plies for radial stiffness crossed with two thin vertical plies for longitudinal flex. Roundover bearing edges, the patented Infinite Snare Bed, eight INDe lugs and the SB1 strainer. Five sizes, made to order.
Two grain directions, two jobs
Most ply shells either run every ply horizontally or alternate them evenly. INDe does neither. The Flex-Tuned shell is three thick plies running around the shell, which keeps it stiff radially and holds it round under tension, crossed with two thin plies running up and down, which lets it flex along its length.
The intent is a shell that stays true where a drum needs to be true and moves where movement becomes tone. At 4.5 mm across five plies it is a thin wall by modern standards, and the roundover edges — an eighth of an inch outside, a sixteenth inside — keep the head contact broad rather than pointed.
Finishes chosen by paint chip
The custom colour option is unusually literal: pick a colour from a Sherwin Williams or Benjamin Moore chart, send the name, and the shop matches it in a satin sheen. The matte and premium satin lacquers are stained instead, so the grain stays visible.
Five sizes are offered, from a 6.5 by 13 in through to an 8 by 14 and a 5.5 by 15, quoted at four to six weeks.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Maple1 |
| Plies | 51 |
| Construction | INDe Flex-Tuned maple, 4.5 mm — three thick horizontal plies with two thin vertical plies1 |
| Bearing edge | Roundover, 1/8 in radius outside and 1/16 in radius inside1 |
| Snare bed | Infinite Snare Bed, US patent 10,699,6821 |
| Finish | Matte lacquer, premium satin lacquer or custom paint colour1 |
| Hardware | |
| Lugs | 8 INDe double-ended1 |
| Strainer | INDe SB1, with matching butt plate1 |
| Hoops | 2.3 mm triple-flanged chrome over steel; chrome over brass or die-cast on 14 in drums1 |
| Snare side | |
| Snare wires | Puresound Custom, 20 strand1 |
| Origin | |
| Made in | United States — Kalamazoo, Michigan1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec