
DW · Collector's Series
DW Collector's Series Top Edge
The DW Collector's Series Top Edge is a 6 × 14-inch snare drum on a 10-ply North American maple shell with a heavy brass ring at the batter edge only. It takes rimshots like a metal snare while keeping the snare side all wood, and uses True-Hoops with the MAG throw-off and a five-position butt plate.
One ring instead of two
The Top Edge is the half-measure version of the Edge, and it is a half-measure with a purpose. Brass sits at the batter edge, where the stick lands and where a rimshot is made. The snare side is left as bare maple.
Leaving the resonant edge in wood keeps the snare response softer and the overall decay longer than the full Edge manages. The drum still cracks, but it does not tighten up underneath.
Which one to choose
If the reason you are looking at this pair is rimshots, both will do it. The question is what you want the rest of the note to do.
The Edge, with brass at both ends, is the brighter and more controlled drum — closer in behaviour to a metal snare. The Top Edge keeps more of the maple shell’s warmth and sustain and is the easier of the two to place in an acoustic setting.
Details
The five-position butt plate is worth knowing about: it sets the wires’ resting angle against the head in discrete steps, which on a drum with mixed materials at the two edges is a more useful adjustment than usual.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | North American maple with a brass ring at the batter edge1 |
| Plies | 101 |
| Hardware | |
| Lugs | Collector's Series turret lugs1 |
| Hoops | True-Hoops1 |
| Throw-off | MAG throw-off with five-position butt plate1 |
| Snare side | |
| Snare wires | True-Tone1 |
| Origin | |
| Made in | United States1 |
| model | |
| Part number | DCOM10614DCXXXX1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec