
Dunnett Classic · Classic
Dunnett Classic StereoPly
Dunnett Classic's premier ply line: a four-ply maple and poplar shell with four-ply reinforcement rings, cut with LA Camco bearing edges. Eight and ten lug models in 5.5, 7 and 8 in depths at 14 in, with a two-ply acacia shell following in spring 2026. Finishes rotate with each production run.
A thin shell with thick rings
Four plies of maple and poplar is a deliberately light shell, and the four-ply reinforcement rings are what make it work: the rings carry the bearing edge and the tuning load, leaving the middle of the shell free to move. It is the pre-war American construction, rebuilt.
The bearing edge is cut to what Dunnett calls the LA Camco profile — a reference to the Camco drums built in Los Angeles in the 1970s, whose edges are among the most copied in the business.
Finishes are a production run, not a catalogue
The company describes the finishes as rotating, with new ones added on every production. The first run went out in Champagne Sparkle, B20 Bronze Sparkle, Matte Metallic Purple and Gloss Black, and a two-ply acacia shell was announced to ship in spring 2026.
Eight and ten lug versions are offered in each of three depths, which is a wider spread of tuning behaviour than a single ply count usually gets.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Maple and poplar; two-ply acacia from spring 20261 |
| Plies | 41 |
| Construction | 4-ply maple and poplar with 4-ply reinforcement rings, LA Camco bearing edges1 |
| Finish | Rotating — Champagne Sparkle, B20 Bronze Sparkle, Matte Metallic Purple and Gloss Black in the first run1 |
| Hardware | |
| Lugs | 8 or 101 |
| Hoops | Double Edge double-flange, standard1 |
| Throw-off | Dunnett R5 with quick release1 |
| Snare side | |
| Snare wires | Presence 42 strand1 |
| model | |
| Model numbers | 5514SP, 714SP and 814SP, in 8 and 10 lug versions1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec