
Dunnett Classic · Classic
Dunnett Classic Model K Cast Bronze
A cast bronze snare drum on a 2.99 mm shell — cast rather than spun or rolled, which is rare outside cymbal making. Ten lugs, die-cast hoops as standard, the Dunnett R5 quick-release throw-off and 42-strand Presence wires. Offered at 14 by 7 and 14 by 8 in, with raw lathed, antique and calico patina finishes.
Cast, not rolled
Almost every metal snare shell is rolled or spun from sheet and seamed, or spun seamlessly from a disc. The Model K is poured. Casting a bronze shell is the technique cymbal foundries use, and it leaves a grain structure and a wall thickness — 2.99 mm here — that no rolled shell would carry. Lathing the outside afterwards is the other half of the cymbal parallel.
The hoop is a menu
Dunnett treats hoops as a real variable on this drum rather than a finish option. Die-cast is standard; the catalogue also shows a KR bronze hoop, a K Type cast hoop, and Acacia MetalWood hoops that put wood against the metal shell. Each changes where a 3 mm bronze shell puts its energy.
Underneath, the fittings are the ones Dunnett is known for: the R5 throw-off, which releases quickly enough to change a snare-side head without detensioning the wires, and 42-strand Presence wires.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Cast bronze1 |
| Construction | Cast bronze shell, 2.99 mm1 |
| Finish | Raw lathed, antique patina or calico patina1 |
| Hardware | |
| Lugs | 101 |
| Hoops | Die-cast as standard; KR bronze, K Type cast and Acacia MetalWood hoops offered1 |
| Throw-off | Dunnett R5 with quick release1 |
| Snare side | |
| Snare wires | Presence 42 strand1 |
| model | |
| Model numbers | 714K10 and 814K10, with hoop and finish variants1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec