
Doc Sweeney Drums · Classic
Doc Sweeney Classic Snare
A steam-bent shell built after the solid-wood snare drums of the early twentieth century, with particular attention paid to reproducing the bearing edge of that era. Chrome-plated solid brass tube lugs, a vintage-style strainer and double-flange hoops. Maple or walnut, both with maple re-rings, at 14 by 5.5, 14 by 6.5 or 13 by 6.5 in.
The edge is the reproduction
Plenty of drums are described as vintage-inspired and get there through hardware and finish. Doc Sweeney says the particular attention went somewhere less visible: the bearing edge. Early twentieth-century solid shells were cut with a profile that is unlike a modern 45, and it is the edge more than the lug that decides how the head sits and how quickly the drum speaks.
Everything else follows the same period logic. Solid brass tube lugs, plated chrome. A vintage-pattern strainer. Double-flange hoops rather than triple. And an internal muffler on request, which is how the drums of that era were damped.
Two woods, three sizes
Maple or walnut, each with maple reinforcement rings, in 14 by 5.5, 14 by 6.5 and 13 by 6.5 in. Finishes are a hand-rubbed natural oil or a Pacific Pearl wrap — one for each half of the period being referenced.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Buyer's choice — maple or walnut, both with maple reinforcement rings1 |
| Construction | Steam-bent shell1 |
| Bearing edge | Reproduction of an early twentieth-century profile1 |
| Finish | Natural hand-rubbed oil or Pacific Pearl1 |
| Hardware | |
| Lugs | Chrome-plated solid brass tube lugs1 |
| Strainer | Vintage style1 |
| Hoops | Double flange1 |
| Option | Internal muffler on request1 |
| Origin | |
| Made in | United States — Carlsbad, California1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec