
Canopus · The Maple
Canopus The Maple Snare Drum
Canopus calls this its standard model, and it is the widest size range in the catalogue: seven shells from 10 by 6 up to 14 by 8 in, all on an 8-ply 5 mm maple shell. Brass lugs, die-cast hoops on the 13 and 14 in drums, Power Hoops on the smaller ones, and the company vintage snare wire.
The one they measure the others against
Every catalogue needs a reference point, and Canopus is open that this is it — the drum it calls its standard model. An 8-ply maple shell at 5 mm is a conventional specification on purpose. What the company says it works on instead is the bearing edge, described as delicate and precise, and the shell construction underneath it.
Seven sizes is the story
The size list runs from a 10 by 6 in side snare through 12 and 13 in shells to four 14 in depths, ending at 14 by 8. Hoops change with diameter: die-cast on the 13 and 14 in drums for a defined crack, Power Hoops on the small ones where a die-cast hoop would weigh too heavily on a short shell. The vintage snare wire is standard throughout, which is a large part of why these drums respond at low volume.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Maple1 |
| Plies | 81 |
| Construction | 8-ply maple, 5 mm1 |
| Finish | Oil, wrap or lacquer, with colour options1 |
| Hardware | |
| Hoops | Die-cast on 13 in and 14 in; Power Hoop steel 2.3 mm on 10 in and 12 in; 8 lug1 |
| Lugs | Brass1 |
| Snare side | |
| Snare wires | Canopus Vintage Snare Wire CPSL-14DR1 |
| Origin | |
| Made in | Japan1* |
| model | |
| Model numbers | M-1060 through M-14801 |
- *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec