Drum Atlas
Menu

Canopus · Custom

Canopus Stave Bubinga Snare Drum

  • Snare drum
  • flagship
  • current

A 14 by 6 in stave bubinga snare, sculpted on the inside so the shell carries a reinforcing-ring profile cut from its own wood rather than glued in. Canopus treats the stave method as the realistic route to a solid shell in a rare hardwood, and shapes the interior to keep resonance in a dense wood.

Updated 2026-09-24Sources

Staves as a supply problem solved

Canopus makes an unusually practical case for stave construction. Finding a piece of a rare hardwood big enough, dry enough and stable enough to hollow into a one-piece shell is the hard part of solid-shell building. Uniformly sized staves, joined with small amounts of adhesive, get most of the way there: the shell keeps the vibrational behaviour of the original wood and gains strength in the bargain.

Then carving the inside

The company is equally direct about the catch. Stave shells tend to be thick, and in a wood as dense as bubinga that thickness can flatten the drum’s sensitivity. Its answer was to sculpt the inside of the shell so that a reinforcing-ring profile is left standing in the wood at the bearing edges, with the rest thinned out. The drum keeps the stability of a heavy shell and gets its resonance back.

Specifications

Specifications
AttributeValue
Shell
Shell materialBubinga1
ConstructionStave, with a reinforcing-ring-style edge sculpted into the shell1
FinishOil, with colour options1
Hardware
HoopsDie-cast, 8 lug1
LugsChrome1
Snare side
Snare wiresCanopus Vintage Snare Wire CPSL-14DR1
Origin
Made inJapan1*
model
Model numberSBS-14601
  • *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Stave Bubinga Snare Drum

    Canopus Drums · accessed 2026-09-24