
Canopus · Custom
Canopus Stabilized Wood Snare Drum
A 14 by 6.5 in maple snare whose outer ply is stabilized wood — figured timber and resin cast together under vacuum pressure, then sliced to 1 mm. The result is a lacquered shell with a flowing grain and colour that Canopus says cannot be repeated, so no two drums carry the same pattern.
Wood that has been filled in
Stabilized wood is a technique borrowed from knife handles and pen turning: highly figured timber, often burl, is placed in a chamber with resin and the air is drawn out so the resin fills the voids. What comes back is hard, dimensionally stable and coloured all the way through.
Canopus uses it as a 1 mm outer ply over a maple shell, so the drum keeps a maple voice and gains a surface that no veneer could produce — flowing grain crossed with resin colour, sealed under lacquer.
Every one is different
The company states that no two shells share a pattern, which is not a marketing flourish so much as a consequence of the process: the figure in the blank decides the figure in the drum. Sizes are listed as 14 by 6.5 in, in steel-hoop and die-cast versions, with the die-cast build quoted at a longer lead time.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Maple with a stabilized wood outer ply1 |
| Plies | 91 |
| Construction | 9-ply maple with an outer ply of stabilized wood, vacuum-pressure cast then cut to 1 mm1 |
| Finish | Lacquer; Buckeye Turquoise among the colour options1 |
| Hardware | |
| Hoops | Die-cast or steel1 |
| Lugs | Chrome, brass or black1 |
| Snare side | |
| Snare wires | Canopus CPSL-14DR1 |
| Origin | |
| Made in | Japan1* |
| model | |
| Model numbers | SW-1465 PH with steel hoops; SW-1465 DH with die-cast hoops1 |
- *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec